FROM TÜRKİYE. CONNECTING THE WORLD.
Contact

BEMİS GLOBAL

Type 1 or Type 2: which EV charging connector does my car use?

Short answer: Type 2 (IEC 62196-2) is the AC charging connector used in Europe and Türkiye; it supports single- and three-phase charging, up to 22 kW in everyday use. Type 1 (SAE J1772) is single-phase only and is found mainly on cars made for North America and on some older Asian models. Bemis AC chargers and cables use Type 2; for DC fast charging the European standard is CCS2.

Type 1 (SAE J1772)Type 2 (IEC 62196-2)
PhasesSingle-phase onlySingle- or three-phase
Typical AC power7.4 kW at 230 V, 32 Aup to 22 kW at 400 V, 32 A, three-phase
Contacts57
Main marketsNorth America, some older Asian modelsEurope, Türkiye
DC fast-charging versionCCS1CCS2
Bemis products—AC chargers and cables; CCS2 DC cables

Frequently asked questions

How do I know which connector my car has?

Look at the charging inlet or the vehicle manual. A Type 2 inlet has seven contacts in a housing with a flattened top edge; Type 1 has five contacts in a round housing.

Can a Type 1 car charge at a Type 2 station?

Yes, with a charging cable that has a Type 2 plug on the station side and a Type 1 plug on the car side. The car still charges single-phase.

Does a Type 2 cable make charging faster?

Only if the car and the supply allow it. Charging power is limited by the smallest of the car’s on-board charger, the cable rating and the supply.

Glossary → · International sales →

BEMIS GLOBAL PARTNERS

Local expertise. Global ambition.

Bring Bemis to your market. Let’s talk about building a distribution partnership in your country.

Become a distributor ↗